2013年托福考试阅读材料专题训练5

Although we now tend to refer to the various crafts according to the materials used to construct them-clay, glass, wood, fiber, and metal-it was once common to think of crafts in terms of function, which led to their being known as the "applied arts." Approaching crafts from the point of view of function, we can divide them into simple categories: containers, shelters and supports. There is no way around the fact that containers, shelters, and supports must be functional. The applied arts are thus bound by the laws of physics, which pertain to both the materials used in their making and the substances and things to be contained, supported, and sheltered. These laws are universal in their application, regardless of cultural beliefs, geography, or climate. If a pot has no bottom or has large openings in its sides, it could hardly be considered a container in any traditional sense. Since the laws of physics, not some arbitrary decision, have determined the general form of applied-art objects, they follow basic patterns, so much so that functional forms can vary only within certain limits. Buildings without roofs, for example, are unusual because they depart from the norm. However, not all functional objects are exactly alike; that is why we recognize a Shang Dynasty vase as being different from an Inca vase. What varies is not the basic form but the incidental details that do not obstruct the object's primary function.

Sensitivity to physical laws is thus an important consideration for the maker of applied-art objects. It is often taken for granted that this is also true for the maker of fine-art objects. This assumption misses a significant difference between the two disciplines. Fine-art objects are not constrained by the laws of physics in the same way that applied-art objects are. Because their primary purpose is not functional, they are only limited in terms of the materials used to make them. Sculptures must, for example, be stable, which requires an understanding of the properties of mass, weight distribution, and stress. Paintings must have rigid stretchers so that the canvas will be taut, and the paint must not deteriorate, crack, or discolor. These are problems that must be overcome by the artist because they tend to intrude upon his or her conception of the work. For example, in the early Italian Renaissance, bronze statues of horses with a raised foreleg usually had a cannonball under that hoof. This was done because the cannonball was needed to support the weight of the leg. In other words, the demands of the laws of physics, not the sculptor's aesthetic intentions, placed the ball there. That this device was a necessary structural compromise is clear from the fact that the cannonball quickly disappeared when sculptors learned how to strengthen the internal structure of a statue with iron braces (iron being much stronger than bronze).

Even though the fine arts in the twentieth century often treat materials in new ways, the basic difference in attitude of artists in relation to their materials in the fine arts and the applied arts remains relatively constant. It would therefore not be too great an exaggeration to say that practitioners of the fine arts work to overcome the limitations of their materials, whereas those engaged in the applied arts work in concert with their materials.

Paragraph 1: Although we now tend to refer to the various crafts according to the materials used to construct them-clay, glass, wood, fiber, and metal-it was once common to think of crafts in terms of function, which led to their being known as the "applied arts." Approaching crafts from the point of view of function, we can divide them into simple categories: containers, shelters and supports. There is no way around the fact that containers, shelters, and supports must be functional. The applied arts are thus bound by the laws of physics, which pertain to both the materials used in their making and the substances and things to be contained, supported, and sheltered. These laws are universal in their application, regardless of cultural beliefs, geography, or climate. If a pot has no bottom or has large openings in its sides, it could hardly be considered a container in any traditional sense. Since the laws of physics, not some arbitrary decision, have determined the general form of applied-art objects, they follow basic patterns, so much so that functional forms can vary only within certain limits. Buildings without roofs, for example, are unusual because they depart from the norm. However, not all functional objects are exactly alike; that is why we recognize a Shang Dynasty vase as being different from an Inca vase. What varies is not the basic form but the incidental details that do not obstruct the object's primary function.

3. The word they in the passage refers to
○Applied-art objects
○The laws of physics
○Containers
○The sides of pots

4. Which of the following best expresses the essential information in the highlighted sentence? Incorrect answer choices change the meaning in important ways or leave out essential information.
○Functional applied-art objects cannot vary much from the basic patterns determined by the laws of physics.
○The function of applied-art objects is determined by basic patterns in the laws of physics.
○Since functional applied-art objects vary only within certain limits, arbitrary decisions cannot have determined their general form.
○The general form of applied-art objects is limited by some arbitrary decision that is not determined by the laws of physics.

Paragraph 2: Sensitivity to physical laws is thus an important consideration for the maker of applied-art objects. It is often taken for granted that this is also true for the maker of fine-art objects. This assumption misses a significant difference between the two disciplines. Fine-art objects are not constrained by the laws of physics in the same way that applied-art objects are. Because their primary purpose is not functional, they are only limited in terms of the materials used to make them. Sculptures must, for example, be stable, which requires an understanding of the properties of mass, weight distribution, and stress. Paintings must have rigid stretchers so that the canvas will be taut, and the paint must not deteriorate, crack, or discolor. These are problems that must be overcome by the artist because they tend to intrude upon his or her conception of the work. For example, in the early Italian Renaissance, bronze statues of horses with a raised foreleg usually had a cannonball under that hoof. This was done because the cannonball was needed to support the weight of the leg. In other words, the demands of the laws of physics, not the sculptor's aesthetic intentions, placed the ball there. That this device was a necessary structural compromise is clear from the fact that the cannonball quickly disappeared when sculptors learned how to strengthen the internal structure of a statue with iron braces (iron being much stronger than bronze).

5. According to paragraph 2, sculptors in the Italian Renaissance stopped using cannonballs in bronze statues of horses because
○They began using a material that made the statues weigh less
○They found a way to strengthen the statues internally
○The aesthetic tastes of the public had changed over time
○The cannonballs added too much weight to the statues

6. Why does the author discuss the bronze statues of horses created by artists in the early Italian Renaissance?
○To provide an example of a problem related to the laws of physics that a fine artist must overcome
○To argue that fine artists are unconcerned with the laws of physics
○To contrast the relative sophistication of modern artists in solving problems related to the laws of physics
○To note an exceptional piece of art constructed without the aid of technology

7. An introductory sentence for a brief summary of the passage is provided below. Complete the summary by selecting the THREE answer choices that express the most important ideas in the passage. Some sentences do not belong in the summary because they express ideas that are not presented in the passage or are minor ideas in the passage. This question is worth 2 points.